0102030405
S150 Electric Lock For Kinds Of Cabinet Lockers
DEWOD S series electromagnetic locks are available in a variety of styles and support customization. They are widely used in various smart express cabinets, fresh food cabinets, lockers, etc. After actual market use tests, they have low failure rates and stable performance.
Used with our electromagnetic lock control board, touch screen, etc., we provide warranty for the entire electronic kit.
If you need customization, please contact us.
|
XG-S150 Electromagnetic lock parameter |
|
| Dimension: | 12.5mm*80mm*80mm |
| Way of working: | It is locked by closing the door (power off), and the power-on (12V) instantly triggers the unlocking mode. |
| Emergency unlocking: | The lock body is provided with an emergency unlocking method, and it is not necessary to damage the cabinet in an emergency, and can also be locked. If the mechanical key is used, it can also be unlocked with the external key, which is easy and convenient to operate; |
| Energy saving: | The power-on time of unlocking is 200ms-300ms. Normally, the door is locked to the power-off state without power consumption, and the voltage is 12V. |
| Life test: | Normal temperature switch lock more than 200,000 times |
| Applicability: | No front and back design, all sizes of cabinets for left, right, upper and lower door opening directions can be used. |
| Safety: | Sensitive, shockproof, anti-mite, anti-rust. |
| Line order: | The double red line is the electromagnet power line, and the white and green lines are the micro switch signal lines. |
| Electrical parameter list: | |
| Voltage: 12V | |
| Current：2.2A±0.2A | |
| Resistance: 5.5Ω±0.5Ω | |
| Electromagnet life: more than 1 million times | |
| Key component inspection standards: | |
|
Part Name |
Materials used and related technical requirements |
| Push rod compression spring | Adopt carbon steel material, require salt spray test to reach above 48H, and the relevant compression force meets the test requirements; (push rod spring force 1.5KG±0.2KG) (can be customized according to customer requirements) |
| Electromagnet shaft core and electromagnet mounting plate | Using DT4 electric soft iron material, the surface is electroplated with environmentally friendly blue zinc, and the salt spray test is required to reach 48H or above. |
| Electromagnet plastic core | PA66-GF30% flame retardant material is required to store 24H at high temperature +80° low temperature -30°; the product has no deformation and crack; |
| Lock hook torsion spring and lock hook pull rod tower spring | It adopts stainless steel 304 material and requires salt spray test to reach above 72H, and the related torque and extension tension can meet the test requirements. |
| Locking lever, push rod | PA66+30%+PTFE flame retardant material is required to store 24H at high temperature +80° low temperature -30°, and the product has no deformation and crack; |
| Lock bottom cover and lock top cover | Using cold-rolled sheet material, the surface is plated with environmentally-friendly white zinc, and the salt spray test is required to reach 48H or more; |
| Lock hook | Using powder metallurgy materials, the surface is blackened, and the salt spray test is required to reach above 48H. |
| Limit switch | Using Omron micro switch, life test is required to reach more than 200,000 times |
| Coil insulating tape | Requires a temperature resistance of 100°, the tape can be melted, but there is no burning phenomenon. |
| Assembly and related parameters; | |
| A. Using MX3.0-6P standard cable connection, the lead exposed length is not less than 150mm (including terminals); (can be customized according to customer needs wire length and each type of plug) | |
| B. Close the door to the feedback signal; (can be customized according to customer requirements) | |
| C. Working temperature -30 ° to +80 °, relative humidity 20% -80%; | |
| D. Storage temperature -30 ° to +80 °, relative humidity 20% -80%; | |
|
XG-S150 Installation size 
|
|
| Remarks: The tolerance of the above dimensioning tolerance is 1mm-20mm, the tolerance is ±0.2mm; the tolerance of 21mm-50mm is ±0.3mm; the tolerance of 51mm-100mm is ±0.5mm | |
| 5. The overall requirements of the electromagnetic lock; | |
| A. The surface of the electromagnet lock should be clean, have good luster, no bubbles, scratches, scratches, etc., the lead end should be flat, and the insulating sleeve should be complete without cracking; | |
| B. The electromagnetic lock lead-out wire and the lead-out terminal shall be firm and reliable, and no loose or loose appearance shall occur. The insulating sleeve shall cooperate well with it; | |
| C. The welding of the stroke switch and the electromagnet should be even and full, and there should be no such phenomenon as virtual welding and continuous tinning; | |
| D. After the electromagnetic lock is assembled, the functional components require flexible rotation, and there is no failure phenomenon such as stuck; | |
| E. After the electromagnetic lock cover screw is locked, there must be no screw locking and sliding phenomenon; | |
| F. Qualified products shall be stamped on the front side of the product, and the stamping shall be clear and clear, and there shall be no ambiguity; | |
Mainly used in express cabinets, rental cabinets, storage cabinets, tool cabinets, sales cabinets and other smart cabinets.
S150 Lock Specification
