0102030405
7-inch face recognition device for smart lockers
DF07S-SK embedded face recognition tablet is a high-performance Android industrial computer designed based on ROCKCHIP's super processor PX30. The processor adopts ARM's super-performance quad-core Cortex-A35 architecture, with a maximum frequency of up to 1.3GHz, and the GPU uses ARM's most powerful graphics processor ARM-G31, which is one of the most powerful processors on the market.
Motherboard parameters PX30
|
Main hardware parameters |
|
| CPU | Processor: PX30CPU: 4-core Cortex-A35 architecture, maximum frequency 1.3GHz |
| GPU | GPU：ARM MALI-G31 |
| Memory/Storage | Standard G/EMMC standard 8G |
| Buil-in ROM | 32KB EEPROM |
| MIPI output | Single/dual channel MIPI output |
| Audio and video output | Supports mono output 4R/3W power amplifier |
| USB | 1 Type-c burn-in debugging port, 4 USB2.0HOST, 5 USB channels in total |
| Serial port | 2 485 interfaces (same 485), 3 TTL, 1 DEBUG, a total of 5 serial ports |
| MIPI camera | Dual channel supports dual camera 30pin FPC interface, supports 1300w Camera |
| WIFI, BT | Built-in WIFI, BT4.0 (optional) WIFI module (optional) |
| 3G/4G | External WCDMA, EVDO, 4G full network expansion interface (optional) |
| Relay | 1 normally open + 1 normally closed trunk node |
| Video playback | Support wmv, avi, flv, rm, rmvb, mpeg, ts, mp4, etc. |
| Image Format | Support BMP, JPEG, PNG, GIF |
| watchdog | Support |
| RTC | Support |
| Infrared remote control | Support |
| Timer switch | Support |
| SPI | Support |
| Button | Reset and upgrade keys |
| System Upgrade | Support local USB upgrade |
| Operating system | Android 5.1 or above |
Display parameters
|
Screen parameters |
|
| Screen size | 7 inches |
| LCD screen | capacitive touch |
| Contrast | 450:1 (Typ.) (Transmission) |
| Resolution | 1024(RGB)×600 |
| Screen ratio | 16:10 |
| Display color | 16.7M |
| Display brightness | 480-500cd/m² |
| Working humidity | -20℃ ~ 70℃, ≤80% RH |
| Working temperature | -20℃ ~ 70℃, ≤80% RH |
| Storage humidity | -30℃ ~ 80℃, ≤80% RH |
| Storage temperature | -30℃ ~ 80℃, ≤80% RH |
| Response time | ≤16ms |
| Normal power | ≤30W |
| Screen pitch | 0.0565×0.1695mm (H×V) |
Card reading module
| Product model | HXW0431 |
| Working power consumption | 36MA/5V |
| Working frequency | 13.56MHZ |
| Card reading distance | ~3080MM |
| Interface mode | TTL, USB keyboard output |
| Data transfer rate | UART: 9600bit/s |
| Supports card type | type M1 card and all ISO14443A protocol cards |
| Module size | 45mmx18mmx4.69mm (with buzzer height 7.8mm) |
| Working temperature | -20~+80℃ |
| Storage temperature | -40~+85℃ |
| The voltage of each pin of J2 to ground | -0.3~+5.5V |
| VCC to ground voltage | +3.6~+6.0V |
Mainly used in various face recognition cabinets, self-service cabinets and other smart cabinets.
DF07-SK Touch Panel Specification
